Software modified to suit 1zz-fe

While the go kart engine is being modified. I have been setting up the software to suit one of the 1zz-fe engines downstairs. These have two inductive pick ups; one 36 minus 2 teeth on the crankshaft and a 4 minus 1 tooth on the camshaft. From my research I have found that the first tooth after the crank missing teeth gap is 36 degrees before cylinder 3 and 2 TDC. The camshaft first tooth after the teeth gap is around 36 degrees before cylinder 4 TDC when the VVTI is in neutral position.